Waukesha
Cherry-Burrell Products: Fittings
"Q" Line
Fittings Specifications
 |
Description: Ferrule-End
Fittings robustly designed for heavy duty applications. |
Material: T304
and T316L Stainless Steel. |
Sizes: 1" -
4" |
Dimensions: Classic
lengths as specified in Waukesha Cherry-Burrell Brochure FH-1830.
Finish: Combinations
of surface finishes are available to meet customers' requirements
(see below):
#1 |
Non-polished
I.D. |
Non-polished
O.D. |
|
Inside
diameter has mill finish |
Outside
diameter has mill or tumbled finish with welds passivated. |
|
#3 |
Polished
ID |
Non-polished
OD |
|
Inside
diameter polish options:
-
32
Ra
-
20
Ra
-
15
Ra+EP (electropolish)
|
Outside
diameter has mill or tumbled finish with welds passivated. |
|
#7 |
Polished
ID |
Polished
OD |
|
Inside
diameter polish options:
-
32 Ra
-
20
Ra+EP (electropolish)
-
15
Ra+EP (electropolish)
|
Outside
diameter is mechanically polished with polish marks blended. |
|
Waukesha
Cherry-Burrell uses a multi-pass polishing method, utilizing
progressively finer grits to achieve desired finish.
NOTE: Please
contact factory for more polish and electropolish
information. Additional options are available. Contact
factory for options not shown. |
Pressure
Ratings: Q-Line Clamped Unions
PSI
Service Rating
Service
Ratings are based on hydrostatic tests using standard elastomer
gaskets, properly assembled joints, and no shock pressure.
Cleaning: |
Finished
parts are subject to a six-step RO water cleaning cycle. |
Etch: |
WCB
logo, material grade, and 3A symbol (when applicable). |
Packaging: |
Typically,
fittings are skin-packed (other packaging methods are available;
contact factory). |
Documentation: |
Material
test reports are available upon request, for 316L only. |
Elastomers: |
Buna-N,
EPDM, PTFE (Teflon2), FKM (Viton2),
Silicone |
Approvals: |
Canadian
Standards Association (contact factory for more information). |
2Viton
and Teflon are trademarks of the E.I. DuPont De Nemours Company |
